Licensed & Insured, in Bridgeport and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Bridgeport
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (475) 262-8505 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Bridgeport and surrounding areas · On-site visits included · Free estimate within 24h
Bridgeport Metal Roofing is a team of local certified professionals based in Bridgeport. We respond quickly in Bridgeport and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (475) 262-8505⭐⭐⭐⭐⭐ 4.9/5 · 241 verified Google reviews
“We needed the roof on our equipment barn done before the wet season and these guys knocked out the whole thing in about four days. The crew was organized, kept the site clean, and the ribbed panels look sharp. No leaks so far and we've had some serious rain since.”
Commercial & Agricultural Metal Roofing
“Our porch roof was a mess and I was worried about the cost of tearing everything off. They did a metal roof over the existing shingles instead, which saved us a ton. Took two days and the cleanup was spotless, my wife couldn't even find stray screws in the yard.”
Metal Roof Over Shingles (Retrofit)
“Had a red metal roof put on our new storage building and it came out exactly how I pictured it. The color is really rich in person and the panels are straight and tight. Honestly surprised at how fast they got it done.”
Metal Roof Installation
“We went with standing seam on our white colonial and it completely changed the look of the house, clean lines, no exposed fasteners, just sharp. The crew of four finished in under a week and were respectful of the landscaping. Worth every penny.”
Standing Seam Metal Roofing
“Water was coming in around our chimney every time it rained hard and I'd had two other guys look at it with no luck. Bridgeport Metal Roofing found the failed flashing, redid it properly, and we've been bone dry through several storms since. Relieved is an understatement.”
Chimney & Skylight Repair
“The old roof on our pavilion-style house was shot, so we had them tear it off and replace it with a new metal system. They did a solid job overall and the roof looks great. Only gripe is the project ran about a week longer than quoted, but the crew kept us informed the whole time.”
Metal Roof Replacement
“A few panels on our metal roof were loose and rattling in the wind, and they came out, re-fastened everything with new screws, and swapped the damaged ones. Quick, fair price, and the rattle is gone.”
Metal Roof Repair
“We had them out to inspect the metal roof on our brick house before listing it, and I appreciated that they didn't try to sell me a full replacement. They gave a thorough report, tightened a couple of things and touched up the flashing. Honest outfit, I'd use them again.”
Metal Roof InspectionReal photos of our work in Bridgeport · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes tear-off, underlayment, panels and fasteners; pitch and access raise the rate. |
| Standing seam installation | Starting at $12/sq ft | Concealed clips, raised seams and custom flashing; steeper roofs and dormers add labor. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Includes shingle-profile panels and trim; historic or HOA review may add design time. |
| Complex or large-scale job | On estimate | Mansard roofs, multiple dormers and heavy flashing need an on-site look before pricing. |
| Travel | Included | In Bridgeport and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, simple gable | Starting at $10/sq ft | Includes panels, clips, underlayment and standard trim on an accessible roof with few penetrations |
| Mechanically seamed standing seam | Starting at $13/sq ft | Includes field seaming, heavier trim and flashing on steep or complex roofs with multiple valleys |
| Low-slope porch or addition section | Starting at $14/sq ft | Includes taller seam profile, heavier underlayment and formed transition flashing into the main roof |
| 24-gauge steel upgrade | Adds $1 to $2/sq ft | Heavier substrate for wind and impact resistance on shore-facing roofs in Fairfield and Westport |
| Copper and specialty metal | On estimate | Material cost and patina finish vary widely, so the roof needs an on-site look before pricing |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel replacement | Starting at $9/sq ft | Full tear-off, decking inspection, underlayment, and new corrugated or ribbed panels with fasteners. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and raised seams; steeper pitch and complex valleys raise the rate. |
| Metal shingle or stone-coated steel | Starting at $13/sq ft | Stamped or granulated panels; historic district color restrictions can add lead time and cost. |
| Complex or large-scale job | On estimate | Mansard roofs, multiple dormers, chimneys, and decking repairs need an on-site look before pricing. |
| Travel | Included | In Bridgeport and surrounding towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (475) 262-8505, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over single-layer shingles | Starting at $7/sq ft | Includes slip sheet, new trim, and flashing; price rises with pitch and roof height. |
| Retrofit with deck repair | Starting at $9/sq ft | Covers sheathing replacement and rot repair around chimneys, skylights, and dormers. |
| Standing seam or metal shingle retrofit | Starting at $11/sq ft | Premium profiles with concealed fasteners; the panel choice and detail count drive the number. |
| Complex or large-scale job | On estimate | Steep Victorian roofs, multiple layers, or historic district review need an on-site look first. |
| Travel | Included | In Bridgeport and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak or flashing repair | Starting at $450 | Includes inspection, leak trace, and reseal or flashing repair at one location, accessible roof. |
| Panel replacement (per panel) | Starting at $650 | Includes removal of damaged panel, matching profile and finish, and re-fastening; pitch and height affect price. |
| Screw replacement and re-fastening | Starting at $550 | Includes pulling corroded screws, installing larger neoprene-washered fasteners, and sealing penetrations on exposed-fastener roofs. |
| Chimney or skylight flashing rebuild | Starting at $850 | Includes removing old flashing, installing new step and counter flashing, and sealing at the masonry joint. |
| Storm damage repair with insurance documentation | On estimate | Requires on-site inspection to document wind uplift, hail bruising, and scope before a number is given. |
| Estimate | Free | Response within 24 hours at (475) 262-8505, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (fasteners, pipe boot) | Starting at $450 | Includes leak tracing, fastener or boot replacement and water test; pitch and access move the price. |
| Flashing rebuild (chimney, skylight, dormer) | Starting at $750 | Includes opening the transition, new metal flashing and sealant; complexity of the transition moves the price. |
| Seam or panel repair (standing seam) | Starting at $650 | Includes seam re-closing, clip replacement and panel re-seating; number of affected seams moves the price. |
| Complex or large-scale leak job | On estimate | Multiple leak points, wet decking or storm damage need an on-site look before we quote. |
| Travel | Included | in Bridgeport and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small roof or garage) | Starting at $750 | Covers inspection, failed screw replacement and new washers on a small panel run. |
| Full residential re-screw | Starting at $1,850 | Every fastener pulled and replaced with oversized corrosion-resistant screws and UV washers. |
| Steep or staged roof access | On estimate | Victorian and mansard roofs in the East End need staging and roof jacks, priced after a walk. |
| Stainless hardware upgrade | On estimate | Salt-air exposure near the harbor and shore adds material cost on stainless screws and washers. |
| Travel | Included | In Bridgeport and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple garage or shed | From $5.50/sq ft | Includes panels, coated screws, closures and basic trim; deck condition and access move the price |
| R-panel roof on addition or workshop | From $6.50/sq ft | Includes underlayment, panels and flashing; pitch, dormers and chimney tie-ins raise the number |
| Re-fasten and re-seal existing panels | From $2.50/sq ft | Replaces corroded screws and closures on sound panels; panel count and roof height affect the total |
| Complex or large-scale panel roof | On estimate | Dormers, skylights, multiple roof planes and historic district requirements need an on-site look first |
| Travel | Included | In Bridgeport and surrounding towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation (architectural look) | Starting at $9/sq ft | Includes tear-off, underlayment, flashing and architectural-look steel shingles; pitch and roof size move the price. |
| Slate-look or shake-look metal shingle | Starting at $11/sq ft | Premium stamped profile with concealed fasteners; steeper mansards and complex valleys raise the per-square cost. |
| Metal shingle roof repair | Starting at $450 | Covers re-seating lifted shingles, replacing damaged panels and re-fastening; leak tracing at flashings adds scope. |
| Retrofit over existing shingles | On estimate | Requires a deck and layer check first, since code limits how many existing layers you can cover. |
| Travel | Included | In Bridgeport and surrounding towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (475) 262-8505, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, full tear-off | Starting at $9/sq ft | Includes strip to deck, underlayment, panels, and standard flashing; pitch and dormers move the price |
| Retrofit over one shingle layer | Starting at $8/sq ft | Includes inspection, underlayment, and panels over a sound deck where code allows |
| Slate or shake profile upgrade | Starting at $11/sq ft | Textured premium profile; roof complexity and historic district color requirements affect the rate |
| Repair and panel replacement | On estimate | Depends on panel count, matching the original profile, and access to the damaged section |
| Estimate | Free | On-site walk-through and written quote within 24h at (475) 262-8505, no obligation |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay, chimney cap) | Starting at $20/sq ft | Includes shop-formed copper panels and stainless fasteners; complexity and access drive the price up. |
| Zinc or aluminum specialty roof | Starting at $24/sq ft | Includes formed panels and flashing; metal type, gauge, and roof pitch move the rate. |
| Full copper architectural roof | Starting at $32/sq ft | Includes full flat-seam or standing seam copper with soldered details; size and steepness move it. |
| Complex or large-scale job | On estimate | Turrets, mansards, multiple valleys, and historic review need an on-site look before a number. |
| Travel | Included | In Bridgeport and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-plane garage or workshop roof | Starting at $2.50/sq ft | Includes wash, rust treatment, spot primer, and one coating system on an accessible roof. |
| Residential roof with dormers or steep pitch | Starting at $3.25/sq ft | Adds fall protection, detail work around dormers, and more labor per square foot. |
| Rust treatment and fastener replacement | Starting at $4.00/sq ft | Covers heavy rust at cut edges and fasteners, plus new screws and washers before coating. |
| Standing seam or metal shingle roof | On estimate | Seams, pans, and profiles vary widely, so we inspect before quoting a per-foot number. |
| Travel | Included | In Bridgeport and surrounding towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (475) 262-8505, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single flashing detail repair | Starting at $600 | Covers one location: failed flashing removal and custom-bent replacement, with sealant and standard fasteners included |
| Chimney pan or cricket rebuild | Starting at $950 | New pan, cricket and counter-flashing tied into the deck, priced by chimney size and roof pitch |
| Skylight curb re-flash | Starting at $850 | Rebuilt curb and back pan sealed to the panel or shingle, with deck repair billed separately if rot is found |
| Valley and wall flashing replacement | On estimate | Scope depends on linear footage, underlayment condition and whether panels must be lifted |
| Travel | Included | in Bridgeport and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards, standard residential roof | Starting at $1,200 | Includes layout, salt-rated guards, and installation on a typical single-family roof with straightforward access |
| Snow guards, steep or tall roof | Starting at $1,800 | Adds staging and fall protection for steep Victorian gables and tall two- and three-family houses |
| Snow rails, continuous system | Starting at $2,400 | Continuous rail for steep gables that must hold snow until it melts, priced by linear foot and row count |
| Eave and valley ice protection | Starting at $900 | Membrane and flashing detailing to stop ice-dam backup on low-pitch roofs and dormers |
| Complex or large-scale job | On estimate | Large roofs, multiple levels, and historic district review need an on-site look before we quote |
| Estimate | Free | Response within 24 hours at (475) 262-8505, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic walk, photo documentation, and a written repair versus replacement recommendation. |
| Minor storm repair | Starting at $350 | Lifted ridge caps, backed-out screws, and small flashing reseats; price moves with access and panel count. |
| Panel and flashing repair | Starting at $850 | Damaged panel swap or chimney and skylight flashing rebuild; matching material availability moves the price. |
| Partial re-roof or large storm scope | On estimate | One or more slopes with deck damage; needs an on-site look before any number is given. |
| Insurance documentation | Included | Photo set and scope line items prepared for your adjuster; coverage remains your insurer's decision. |
| Travel | Included | In Bridgeport and surrounding towns, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard single-family inspection | Free estimate | Covers roof walk, fastener and flashing check, written report with photos; price moves with roof size and pitch |
| Steep or complex roof inspection | Starting at $350 | Anchored access on steep gables or multi-plane roofs; factor is pitch, height and number of planes |
| Insurance or real estate report | On estimate | Formatted documentation for adjusters or buyers; scope depends on claim or transaction requirements |
| Travel | Included | in Bridgeport and surrounding towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless 5-inch aluminum gutter | Starting at $9/linear ft | Includes forming, hangers, basic downspout connections; run length and roof height move the price. |
| Seamless 6-inch with snow-rated hangers | Starting at $13/linear ft | Tighter hanger spacing and larger trough; steep roof access and snow load drive the rate up. |
| Leaf guard or screen system | Starting at $6/linear ft add-on | Micro-mesh or reverse-curve covers; debris load from maples and sycamores sets the spec. |
| Downspout routing and dry well | On estimate | Needs an on-site look at grade, foundation and discharge point before a number is given. |
| Travel | Included | in Bridgeport and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (475) 262-8505, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial roof inspection and written scope | Free estimate | On-site deck, drainage, and penetration assessment with photos, plus a written scope you can compare against other bids. |
| Exposed-fastener ribbed panel roof (garage or workshop) | Starting at $9 per sq ft | Coated steel panels, underlayment, and coated fasteners; price moves with pitch, height, and access. |
| Standing seam panel system (warehouse or church) | Starting at $14 per sq ft | Concealed fasteners, raised seams, and full flashing package; wide spans and low slope push the number up. |
| Insulated panel system | On estimate | Factory-insulated panels sized to the building's thermal envelope; needs an on-site look at framing and span. |
| Retrofit over existing roof | On estimate | New panels over the existing roof with underlayment; cost depends on existing layers, deck condition, and code limits. |
| Travel | Included | In Bridgeport and surrounding towns across Fairfield and New Haven counties, with no separate call-out fee. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Bridgeport need a crew that understands the local housing stock and the weather that hammers it. Bridgeport Metal Roofing is that local resource, a network of licensed, bonded, and insured contractors who install, replace, re-roof, and repair metal roofing systems across Bridgeport, Stratford, Trumbull, Shelton, Milford, and the surrounding communities. We work on everything from steep gabled Victorians in the East End to low-pitched two-family homes on the East Side and the larger shore colonials in Fairfield and Westport.
Our work covers the full range of metal roofing: new metal roof installation, complete replacement, retrofit over existing shingles, and targeted repairs. We know the local challenges firsthand: salt air that corrodes cheap fasteners, nor'easter winds that lift panels, heavy wet snow and ice dams at the eaves, and the large stock of aging screw-down roofs whose fasteners are backing out. If you are looking for a straight answer on repair versus replacement, call (475) 262-8505 or request a free estimate.
Metal roofs are durable, but they are not maintenance-free. The most common failure we see on 15 to 30 year old exposed-fastener roofs is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal fails, water finds its way in. Other frequent culprits include seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels after a storm, and punctures from fallen limbs. Each of these creates an entry point that can worsen quickly.
Ignoring a small leak is a costly mistake. Water can track along purlins and decking far from the visible entry point, leading to rotted sheathing, damaged insulation, and interior mold. By the time a stain appears on your ceiling, the damage is often more extensive than it looks. That is why we take a straightforward approach to metal roof leak repair: find the true source, fix it properly, and tell you honestly whether a repair is enough or if replacement is the smarter investment.
In many cases, a full screw replacement and re-fastening restores a watertight roof for a fraction of the cost of replacement. If your panels are sound and the leaks are isolated to fasteners and flashing, metal roof repair is often the right call. We will walk you through the options and give you a clear recommendation, not a sales pitch. Call (475) 262-8505 to schedule an inspection or contact us online.
We install the full spectrum of metal roofing systems and match each one to the home, the budget, and the long-term plan. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed fasteners, and a clean, durable finish that handles thermal movement well. Corrugated & Ribbed Panel Roofing is the economical workhorse for garages, workshops, barns, and outbuildings. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front but has no exposed screws to maintain, while screw-down panels cost less and need their fasteners serviced over the roof's life. When the deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate way to save on tear-off and disposal. When the deck is compromised, a full tear-off and Metal Roof Replacement is the only responsible path. We will tell you which one you actually need.
Metal roof costs in Bridgeport are typically quoted per square foot for installations and often as flat-rate pricing for repairs. The final number depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, the condition of the decking, and access to the roof. We frame all figures as typical ranges because no two roofs are the same, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clear picture of where your project falls, visit our pricing page or request a free estimate and a free roof inspection. We will give you a written scope with honest options, including when the cheaper repair is the smarter choice.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We do not waive, absorb, or pay deductibles, and we never suggest that a roof will be free or no cost to you.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices, and recover over existing shingles may be limited by code. Requirements vary, always verify with the Bridgeport building or planning department before starting your project. For help understanding the process, contact us.
Ready to get started? Bridgeport Metal Roofing serves in Bridgeport and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Bridgeport · Response within 24h · No commitment · ☎ (475) 262-8505
Your Free Quote Request