Serving the Bridgeport area  ·  (475) 262-8505  ·  Open Mon-Sun 7am-7pm
📞 (475) 262-8505 Free Quote

Metal Roofing in Shelton, CT (06484) · Local Professionals

Bridgeport Metal Roofing · Fast response in Shelton and the Bridgeport area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+241Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Shelton's hillside homes and Housatonic-side houses take a beating from wind and ice, especially the older roofs that have seen decades of nor'easters. From the steep lots off Route 110 to the 1950s ranches and split-levels tucked behind Bridgeport Avenue, roofs here face salt air, freeze-thaw cycles, and heavy wet snow that finds every weak seam.

Homeowners in Shelton (06484) call Bridgeport Metal Roofing because we know what fails first on these roofs: cheap fasteners corroded by marine air, flashing gaps around chimneys, and ice dams at the eaves on high-elevation properties. We're based in Bridgeport, just down the road, and we've worked on everything from corrugated garage panels near the Housatonic to standing seam on newer colonials off Huntington Street.

Metal Roofing in Shelton (06484)

Shelton is not flat, and that matters for roofing. Many homes sit on grades that drop away from the street, with tight driveways and limited staging space. The soil is glacial till in places, which means drainage around the foundation can be fussy, and gutters need to be sized and hung correctly to move water away from the house. Older homes near the center of town often have steep gabled roofs with dormers, while the 1950s-70s ranches and split-levels out toward Trumbull and Stratford lines have low-pitched roofs where ice dams form quietly at the eaves. We see a lot of wind-lifted panels after storms, and on the hillside streets off Route 110, fallen limbs are a common cause of punctures.

Our team has been serving Shelton and the greater Bridgeport area for years. We know the difference between a quick repair on a corrugated panel and a full standing seam installation that has to handle salt air and snow load. Whether it's a Cape Cod near the Shelton History Center or a commercial building on Bridgeport Avenue, we bring the right fasteners, the right flashing details, and the right approach for the local climate.

Our services in Shelton

How a Job Works in Shelton

Step 1: You call us at (475) 262-8505 or request a free estimate online. We schedule an on-site assessment at your Shelton property, usually within a couple of days. We'll inspect the roof, check the attic if accessible, and talk through what we find. You get a written estimate with options, no pressure.

Step 2: Once you approve, we handle the work. On tight Shelton lots, we plan staging carefully, sometimes using a dumpster placed in the driveway and a conveyor to get materials up. If your home is in a historic district or HOA, we can coordinate the paperwork and color choices. We pull the roofing permit from the city and schedule inspections as required. Most residential roofs take one to three days, depending on size and weather.

Step 3: Cleanup is part of the job. We use magnetic sweepers to pick up nails, we haul away all old materials, and we do a final walkthrough with you to make sure you're satisfied. We leave your property clean and your roof ready for the next storm.

Pricing in Shelton depends on the size and pitch of your roof, access, and the condition of the existing decking. For a typical ranch or split-level, metal roof installation starts around $8 per square foot, with standing seam from $10 per square foot. A full replacement runs from $9 per square foot, and if you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. We always provide a free estimate so you know the exact cost before we start. Call (475) 262-8505 to schedule yours.

My house is on a steep lot off Route 110 in Shelton. Can you still install a metal roof with limited access?
Yes. We deal with steep lots and tight access all over Shelton. We'll assess the site during the free estimate and plan how to stage materials safely, whether that means using a conveyor, a crane, or careful manual carrying. We've worked on hillside homes where the backyard drops off, and we know how to protect your landscaping and keep the crew safe.
A storm just lifted some panels on my roof in Shelton. How fast can you get out for an emergency repair?
We prioritize storm damage calls in Shelton and the surrounding area. Call us at (475) 262-8505 and we'll schedule an inspection as soon as possible, often the same day or next day. We can tarp or secure the roof to prevent further water damage, then give you a repair estimate. We work with your insurance company if a claim is needed.
What's the typical cost for a metal roof repair in Shelton compared to a full replacement?
Most repairs in Shelton start at $450, whether it's a leak, flashing issue, or a few fasteners. A full replacement is priced per square foot, starting around $9 per square foot for a standard metal roof. The deciding factor is usually the age and condition of the existing roof. If it's a single failed seam or a chimney flashing, a repair makes sense. If the roof is 20 years old and showing widespread corrosion, replacement is more cost-effective.
Do I need a permit for a metal roof in Shelton, and how do I get one?
Yes, the City of Shelton requires a permit for roof replacements and most installations. Permit fees and requirements vary, so we always verify with the Shelton Building Department before starting. We handle the permit application and schedule the required inspections for you. If your home is in a historic district, there may be additional design review, and we can help with that paperwork too.
My neighbor's tree hangs over my roof in Shelton. What are my rights if branches damage my metal roof?
In Connecticut, you generally have the right to trim branches that overhang your property line, but you should check local ordinances and talk to your neighbor first. If a branch from your neighbor's tree falls and damages your roof, your insurance typically covers the repair, and your insurer may pursue the neighbor's policy. We can document the damage for your claim. If you're in an HOA, review the covenants for any rules about tree maintenance and roof style.
Are you fully insured for roofing work in Shelton?
Yes. Bridgeport Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage. You can have peace of mind knowing that if anything happens on the job, you're protected.
What maintenance does a metal roof need in Shelton's climate?
In Shelton, metal roofs need periodic checks, especially after winter. We recommend an annual inspection to look for loose fasteners, debris in gutters, and any signs of corrosion or sealant wear. Ice dams can be a problem on lower-pitched roofs, so keeping gutters clear and considering snow guards is smart. We offer maintenance plans and can inspect your roof for free to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Bridgeport

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Bridgeport

All your work handled by qualified professionals in Bridgeport

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

241+ Verified Client Reviews in Bridgeport

⭐⭐⭐⭐⭐ 4.9/5 · 241 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Bridgeport · Response within 24h · No commitment · ☎ (475) 262-8505

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Bridgeport ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm